Poke welding guns details

The wide range of poke welding guns available from PW Resistance Welding Products ensures that there is always a gun suitable for the user requirements. A precision welding poke gun is suitable only for thin gauge materials. For special requirements like non-standard welding electrodes, special earth clamps or workshop trolleys please contact your nearest dealer.

All single sided guns (apart from the PG6), come fitted as standard with 1.5m cables and a Vise-Grip type earth clamp with copper jaws. For special requirements, like longer leads, special earth clamps, non-standard welding electrodes or workshop trolleys contact your nearest distributor or PW Sales.

PW PG1 poke welding gun


The PG1 is the smallest single side gun. It can be fitted with a straight or 90° tip and has a built in switch.

PW PG2 poke welding gun


The PG2 is the most widely used gun in the range. Easy to handle and with a conveniently placed switch it can be used for a wide variety of work.

PW PG2W water cooled poke welding gun


The PG2W is a fully watercooled version of the PG2, allowing use under higher duty cycle conditions.

PW PG3 medium duty poke welding gun


The PG3, (shown here with a roll spot wheel) takes a 13mm tapered electrode, ideal for medium duty work on heavier gauges than the PG2.

PW PG3W medium duty water-cooled poke welding gun


The PG3W is a fully watercooled version of the PG3, allowing use under higher duty cycle conditions.

PW PG4 series poke welding gun


The PG4 gun is designed as a series welder. This gun will apply 2 spots simultaneously and is ideal for fast operations or where attaching an earth can be difficult.

PW PG5 pliers poke welding gun


The PG5 is an ergonomically designed pliers gun, for use where access to thin gauge sheets (up to 0.5mm) is required.

PW PG5M miniature pliers welding gun


The PG5M miniature pliers gun is the smallest in the range. Designed for use in the electronics industry, it offers a high degree of precision.

PW PG6 heavy duty poke welding gun


The PG6 is a heavy duty gun, fully watercooled and designed for use with watercooled cables. It will be used for thicker materials or high duty cycle applications.