Watercooled Cables
A wide range of water-cooled jumper connectors is available. The standard range is based on the cross-sectional areas of 150, 225 and 300mm²; other sizes are available to special order. Jumpers may be supplied in any length.
The following illustrations are only a few examples of the terminals available (all dimensions in mm, size in MCM)
Technical Data
On terminals AA and AVthe waterfeed is through the cental bore of the terminal. In all other cases, the water feed is 1/4" BSPT.
Other terminals available on request.
Cable Selection
Length (mm) |
Cross-section (mm²) |
|||
150 |
225 |
250 |
300 |
|
1000 |
10000 |
11200 |
12500 |
14000 |
1250 |
9000 |
10000 |
11200 |
12500 |
1600 |
8000 |
9000 |
10000 |
11200 |
1800 |
7500 |
8500 |
9500 |
10600 |
2000 |
7100 |
8000 |
9000 |
10000 |
2240 |
6700 |
7500 |
8500 |
9500 |
2500 |
6300 |
7100 |
8000 |
9000 |
28000 |
6000 |
6700 |
7600 |
8500 |
3150 |
5600 |
6300 |
7100 |
8000 |
3550 |
5300 |
6000 |
6700 |
7500 |
4000 |
5000 |
5600 |
6300 |
7100 |
NOTE: The figures have been calculated with a water flow of 4 l/min with an inlet temperature of 30°C and an outlet temperature of 70°C.
The permissable secondary current /x. at a given duty factor of X, may be calculated from 
Contact PWRWP today for more information
